The ZRN507 torque sensor is ZRN500 series a soft and small size (specific size please telephone counseling). 
 By drawing on foreign products, ZRN507 torque sensor to improve from. Product look more compact 
 More reasonable line treatment, able to output standard analog signal to be more applicable to the needs of domestic customers, 
 While taking into account the good quality of foreign products, is a good substitute for foreign products. 
 This series of torque sensor comprising: a torque sensor www.niujucgq.com 
 1. Torque measurement function; non-contact energy and signal transfer function; function of the output signal digitization. 
 2 static torque signal, rotation torque signal, dynamic torque signal, static torque signal can pass. 
 3. Pass the signal and rotation, speed and steering unrelated. You can adapt to the long, high-speed operation. 
 High precision, good stability; 5 small size, light weight, easy to install; 
 6 without repetition zeroing can be the consecutive pass Reversible torque signal; 
 No collector rings and other wear parts can be high-speed long-running; 
 8. Strong anti-jamming; 
 9 can be any position, installed in any direction; 
 Second, technical indicators 
 Scale range: 10,50,100,200,500 1000N · m 
 Accuracy: 0.5% F · S 
 The applicable speed 20,000 rev / min. 
 4 Ambient temperature: 0 ℃ -50 ℃ 
 5 Frequency response: 100 μs 
 6 weight = 0.8Kg--2 Kg 
 Output signal: 0-12v square wave frequency load current <10mA; 
 Zero torque: 10 KHZ; positive full scale: 15 KHZ; reverse full scale: 5 KHZ. 
 Signal receptacle: (1) 0V (2) +15 V. (3)-15V (4) (speed signal). (5) The torque signal. 
 Transformer induction power supply, the torque sensor of this series can be long-term work, widely used in motors, generators, speed reducer, the diesel engine's torque monitoring. 
 If you need to measure the speed, as long as this series torque sensor housing installed on a dedicated speed sensor tachometer wheel can be measured per revolution speed of 6 - 60 square wave signal. 
 1 using two sets of coupling, with the torque sensor of the sensor is mounted between the power source and the load. 
 Recommendation flexible. Elastic or universal joint couplings, to ensure concentricity ∠ 0.1mm 
 3. Reliable power and load equipment must be fixed to avoid vibration. 
 The base of the torque sensor equipment as much as possible the use of flexible fixed base (swing), avoid moment.